Mushuu Mod
[img]http://66.90.122.10/mayu/pictures/mushu ... huumod.jpg[/img]
Stats
Length: 20cm
Weight: 14g
COG: COG=COP
Writing-Mechanism: N/A
Estimated cost: N/A
___________________________________
Materials List
Doppelfasermaler 2x (4x Caps)
Pic 01 – Pic 02
Comssa 2x (Caps)
Airfit Grip 1x
G3 2x (Tips)
SuperPirate Body 1x
HGG/RSPV Grip 1x
2x2 (or more) Rings of Sailor
If you're interested in these "Doppelfasermaler" - pack is 3,49€ (12 pens) - 4,25$ - i can send you these, they are amazing for modding imo.
Basic tools: Knife, Lighter, Hammer, Tape, Something like the tip in my picture
As you can see from the material list, this colors of this mod are highly configurable – make the mod look like you like it!
___________________________________
Step 01
Gather Materials - Doppelfasermaler 2x | Comssa 2x | Airfit Grip 1x | G3 2x | SuperPirate Body 1x | HGG/RSPV Grip 1x | 2x2 (or more) Rings of Sailor
[img]http://66.90.122.10/mayu/pictures/mushuumod/step01.jpg[/img]
Step 02
Keep the good stuff! - Make sure to seperate the dünn (thin) and dick (thick) caps!
[img]http://66.90.122.10/mayu/pictures/mushuumod/step02.jpg[/img]
Step 03
Gather your tools! - Hammer | Knife | Lighter | Tape | spare big Tip or similar
[img]http://66.90.122.10/mayu/pictures/mushuumod/step03.jpg[/img]
Step 04
Dünn (Thin) Caps - Prepare these 3 parts
[img]http://66.90.122.10/mayu/pictures/mushuumod/step04.jpg[/img]
Step 05
Hammer Time - hammer out the lil stuff inside the 2 caps!
[img]http://66.90.122.10/mayu/pictures/mushuumod/step05.jpg[/img]
Step 06
Remove the lil parts - you have sexy holed out caps now!
[img]http://66.90.122.10/mayu/pictures/mushuumod/step06.jpg[/img]
Step 07
Dick (thick) caps, prepare everything and light up your knife, we have to cut of the last biggest ring of the 2 left caps
[img]http://66.90.122.10/mayu/pictures/mushuumod/step07.jpg[/img]
Step 08
We only need these 2 Rings, remove the rest
[img]http://66.90.122.10/mayu/pictures/mushuumod/step08.jpg[/img]
Step 09
Add the Rinf onto the Comssa Caps, make sure the cutting edge is facing out
[img]http://66.90.122.10/mayu/pictures/mushuumod/step09.jpg[/img]
Step 10
Cut the Airfit Grip in 2 parts, make sure to cut exactly in the middle of the grip!
[img]http://66.90.122.10/mayu/pictures/mushuumod/step10.jpg[/img]
Step 10a
Should look like this now
[img]http://66.90.122.10/mayu/pictures/mushuumod/step10a.jpg[/img]
Step 11
Put the Airfit grips on the Caps
[img]http://66.90.122.10/mayu/pictures/mushuumod/step11.jpg[/img]
Step 11a
Also add the Sailor Rings like this
[img]http://66.90.122.10/mayu/pictures/mushuumod/step11b.jpg[/img]
Step 12
Cut about ~0,5cm of the HGG/RSVP Grip (2x) and put them in the caps
[img]http://66.90.122.10/mayu/pictures/mushuumod/step12.jpg[/img]
Step 12a
like this
[img]http://66.90.122.10/mayu/pictures/mushuumod/step12a.jpg[/img]
Step 13
Push the G3 Tips into the Caps. This is kinda hard (use a mine or something)
[img]http://66.90.122.10/mayu/pictures/mushuumod/step13.jpg[/img]
Step 13a
Should look like this when you're done!
[img]http://66.90.122.10/mayu/pictures/mushuumod/step13a.jpg[/img]
Step 14
Grap the Comssa Caps and some clear tape
[img]http://66.90.122.10/mayu/pictures/mushuumod/step14.jpg[/img]
Step 14a
Add 1 layer of tape on the white part of the comssa cap - no need to cut off the rest
[img]http://66.90.122.10/mayu/pictures/mushuumod/step14a.jpg[/img]
Step 15
Push the Comssa Caps into the Doppelfasermaler Caps
[img]http://66.90.122.10/mayu/pictures/mushuumod/step15.jpg[/img]
Step 16
Put all the parts together...
[img]http://66.90.122.10/mayu/pictures/mushuumod/step16.jpg[/img]
Step 17
Your very own "Mushuu Mod"
[img]http://66.90.122.10/mayu/pictures/mushu ... huumod.jpg[/img]
- Home
-
Tutorials
- Tricks
- Alle
- Anfänger-Tricks
- Trick-Familien
- Pens
- Alle
- Anfänger-Pens
- Pen-Familien
- Pen-Trading
- Sonstige
- Beginner Guides
- Sonstige
- Videos
- FAQ
- Community
- Shop
- Kontaktdaten